m-strategi PORTS
Ms12-Hammer, Discus, Shot put & Javelin
Discus & Hammer Throwing Safety Cage 7-10 m, “Model 2020
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12000
The hammer cage 30305 Model 2020 (With Walk Draw Gate) is made from special extra sturdy aluminium profiles. The posts measure a cross section of 120x100 mm. The wall
thickness of the posts rises from four to six mm. In the lower part the 10 m posts are
additionally reinforced with a cross bracket. All the posts are equipped with ground
anchors at the bottom to keep the net in the correct position. The cage is equipped with
knotless UV protected PP net. The net measures a thickness of 5 mm and a mesh width
of 45 mm. One set consists of four 7 m posts and four 10 m posts. The front two posts
are connected with a bar. The net is fixed onto the bar. This bar replaces the common
gates. The opening of the net can be adjusted from the ground easily by pulling
the net in the required position. There is no further installation needed at the top of the
post. This feature provides much more comfort during the adjustment of the net position
as well as during the installation.
WA(IAAF)certified E 20-1070
Please note:
The uprights are manufactured with a diameter 100 x 120 mm and a wall thickness of
4 - 6 mm according to our static calculations(Max. 20m/sec). Nonetheless, at wind velocities, the net should be completely lowered to the ground in order to prevent storm damage.
- One person can easily adjust the opening to suit the thrower.
- During competition breaks, the net can be raised or lowered within few minutes.
One cage comprises:
4 x 30305/1: 7 m Post
4 x 30305/2: 10m Post
1 x 30305/3: Front Par including Guide Rai
24 x 30305/4: Nylon rollers (for Discus & hammer cage 2020 Order No. 30305)
8 x 30305/5: Ground anchor incl. eye bolt
1 x 30305/6: Safety Net black colour
10 x 30305/7: Fastening ropes
20 x 30305/8: Carabiner hook
2 x 30305/9: Movable weight for door
6 x 30305/10: Support bar for post stability length approx. 4,25 m
1 x 30305/11: Support bar for post stability length approx. 2,90 m
6 x 30305/12: Crossbar for support the net on top length approx. 4,25 m
1 x 30305/13: Crossbar for support the net on top length approx. 2,90
Discus Cage 4 to 6 m High(New IAAF Regulation 2020)
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12001
The new competition discus cage is made from extra sturdy aluminium profiles. The profile measures a cross section of 120x100 mm. The wall thickness measures 3 mm. All posts are equipped with a spacer to keep the net in the correct position. One set consists of seven posts. The front four posts are 6 m high, whereas the back three posts are 4 m high. The cage is equipped with a knotless UV protected PP net. It is available in green or on demand in black colour. The net measures a thickness of 5 mm and a mesh width of 45 mm. The net can be raised and lowered by devices on each post. Furthermore it is supported with cross structures to make the net hang perfectly. The net is in accordance with the new IAAF regulation 190.3
Competition Discus & Hammer Cage 7-10 m
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12002
Safety cage for hammer- and discus throwing, 7 / 10 metres high
Manufactured from special aluminium profile incl. safety net made in Europe.
Oval aluminium profiles (cross section 120 x 100 mm, wall thickness
4 to 6 mm). As an additional reinforcement the 10 m-uprights are
strengthened with internal special aluminium profiles.
Safety cage includes:
- 6 uprights 7.00 m
- 4 uprights 10 m
- 2 gates
- 6 hinge
- 10 ground anchors ( for fix the net at the ground)
- 2 trolleys for adjusting the gates
- 1 safety net incl. 12 fastening ropes
- Stainless steel wire for start & end net to fix the net correctly to the gate
IAAF certified
Please note:
The uprights are manufactured with a diameter 100 x 120 mm
and a wall thickness of 4 - 6 mm according to our static calculations.
Nonetheless, at wind velocities exceeding 20 m/s, the net should be
completely lowered to the ground in order to prevent storm damage.
Competition Discus & Hammer Throwing Safety Cage 7-10 m with Double Net
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12003
Safety cage for hammer- and discus throwing, 7 / 10 metres high.
With Double Net
Manufactured from stable aluminium profiles and fitted with a high quality
safety net. Made in conformance with IAAF and with IAAF certification!
The uprights for our large safety cage are made from high-quality
Oval aluminium profiles (cross section 120 x 100 mm, wall thickness
4 to 6 mm).As an additional reinforcement the 10 m-uprights are
strengthened with internal special aluminium profiles.
The aluminium construction combines enormous stability with ease
of handling.
During competitions, the cage is easy to use:
- One person can easily adjust the gates to suit the thrower.
- During competition breaks, the net can be raised or lowered within
minutes.
Uprights are made of aluminium special profiles and conform to our static
calculations.
One cage comprises:
- 6 uprights 7.00 m
- 4 uprights 10 m
- 2 gates
- 10 handle
- 6 hinge
- 10 spacer
- 2 trolleys for adjusting the gates
- 2 safety net incl. 24 fastening ropes
- 2 Stainless steel wire for start & end net to fix the net correctly to the gate
IAAF certified
Please note:
The uprights are manufactured with a diameter 100 x 120 mm
and a wall thickness of 4 - 6 mm according to our static calculations.
Nonetheless, at wind velocities exceeding 10 m/s, the net should be
completely lowered to the ground in order to prevent storm damage.
Discus & Hammer Safety Cage 5.5 m High
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12004
The training aluminium discus and hammer cage is made from extra sturdy aluminium profiles. The profile measures a cross section of 120x100 mm. The wall thickness is 2.5 mm. The gate of the cage can be adjusted by one person only. All posts are equipped with a spacer to keep the net in the correct position. The cage is equipped with a knotless UV protected PP net. The net measures a thickness of 5 mm and a mesh width of 45 mm. The net can be raised and lowered by devices on each post. One set consists of eight 5.5 m posts and two gates
Safety cage includes:
- 8 uprights 5.5 m
- 2 gates
- 8 handle
- 4 hinge
- 8 spacer
- 1 safety net incl. 10 fastening ropes
- Stainless steel wire for start & end net to fix the net correctly to the gate
Discus & Hammer Cage Free Standing 5.50 m
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12005
The free standing aluminium discus and hammer cage is made from extra sturdy aluminium profiles. The profile measures a cross section of 120x100 mm. The wall thickness is 2.5 mm. The gate of the cage can be adjusted by one person only. All posts are equipped with a spacer to keep the net in the correct position. The cage is equipped with a knotless UV protected PP net. The net measures a thickness of 5 mm and a mesh width of 45 mm. The net can be raised and lowered by devices on each post. One set consists of eight 5.5 m posts and two gates. For this cage, no ground sockets or other floor preparation is necessary. Suitable for training purposes and competitions without IAAF status
Discus Cage 4 m High
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12006
The discus cage is made from alumnium special oval profiles ( 100 x 120 x 2.5 mm). The oval profile prevents the twisting of the uprights! The net is made from Polypropylen 5 mm, mesh 45 mm. Imported from Europe.
IAAF certified.
Safety cage includes:
- 7 uprights 4.3 m
- 7 spacer
- 1 safety net incl. 7 fastening ropes
Protective Padding For Discus & Hammer Cage Post.
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12007
The protective padding is made from a foam core and a PVC cover. The padding measures a height of 2.0 m x 0.3 x 0.3 m. The PVC is weather resistant. This padding reduces the damage of hammer throw impact. Dimension 0.30 x 0.30 x 2,00 m. (1 post need approx. 3 units).
Standard Ground Socket for Discuss & Hammer Cage
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12008
30100: Standard ground socket. Made from aluminium profile 100 x 120 x 800 mm with unattached lid. For discus and hammer cage 7-10 meter high,
30900: Standard ground socket. Made from aluminium profile 100 x 120 x 800 mm with unattached lid. For discus and hammer cage 4.m & 5.5 m meter high,
Special Ground Socket for Discus & Hammer Cage
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12009
Special ground socket for Discus & Hammer Cage. With coat-able cover. Made from special aluminium profile. 30110:Dimension: 120 x 100 x 500 for discus cage 4.00 m & hammer cage 5.5 m 30120:Dimension: 120 x 100 x 800 for discus & hammer cage 7 to 10 m
Hinged Ground Socket System for Hammer Cage
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12010
Our hinged aluminium ground socket is fitted with a to and fro swivel element which allows the hammer cage post to be set up quickly and easily. With lid chamber and attached lid which can be covered on site to suit with running track surfaces.
Hammer Inlay Ring Fiber Glas
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12011
Hammer throwing circle, with IAAF-certification, from fibre glass reinforced plastic, 4-part. IAAF certified
Hammer Inlay Ring Wood
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12012
Hammer Inlay Ring(Wood), This two-section hammer throwing circle reduces the diameter (of a discus circle) to 2.135 m and is made from weatherproof multiplex laminate. The edges of the circle are protected by special aluminium profiles. The hinges between the two sections of the circle are made from stainless steel.
Indoor Mobile Throwing Circle
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12013
12013-1 Indoor mobile throwing circle shot put. The indoor mobile throwing circle shot put is made from wood. The circle measure a length and width of 4 m. The ring measures a diameter of 2.135 m. The circle is equipped with six attachment points. The item can used by wheelchair athletes.
12013-2 Indoor mobile throwing circle discus. The indoor mobile throwing circle discus is made from wood. The circle measure a length and width of 4 m. The ring measures a diameter of 2.5 m. The circle is equipped with six attachment points. The item can used by wheelchair athletes.
Outdoor Mobile Throwing Circle
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12014
The outdoor mobile throwing circle is made from aluminium. The circle is 2 m long and 1.5 m wide. The centre line is marked in white colour. The circle is equipped with six adjustable attachment points. The position of the attachment can be locked to assure a firm hold. The item is equipped with a segment of the discus ring and the shot put stop board. Both items can be fixed with screws on the platform individually. The item can used by wheelchair athletes.
Sockets for Disabled Shot, Discus an Javelin
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12015
The socket is designed to provide space for the straps to fix wheelchairs to the ground. For shot put, discus and javelin Made of aluminium. Incl. bolts, nuts
12015-1: Special ground socket with coat able cover. Set of 6 pieces
12015-2: Special ground socket with coat able cover .1 piece.
12015-3: Standard ground socket with lid. Set of 6 pieces.
12015-4: Standard ground socket with lid. 1 piece
Shot Put & Discus Ring. Dismantle Version
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12016
12016-1/DS: Shot put throwing circle. This version can be dismantled to reduce freight charges as well as protecting the product from taking damage. Shot put throwing circle made from aluminium profile, with IAAF-certification. The shot put throwing circle is rolled precisely with a diameter of 2.135 m.
With IAAF-certification.
12016-2/DS: Discus throwing circle. This version can be dismantled to reduce freight charges as well as protecting the product from taking damage. Shot put throwing circle made from aluminium profile, with IAAF-certification. The discus throwing circle is rolled precisely with a diameter of 2.50 m.
With IAAF-certification.
Shot Put Ring
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12017
Shot Put Ring. Made from aluminium profile. The Shot Put Ring is rolled precisely with a diameter of 2.135 m. Additional struts guarantee this two-section circle’s stability and strength. Included centre point and marking for levelling of the concrete surface inside. IAAF certified.
Discus Ring
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12018
Discus Ring. Made from aluminium profile. The Discus Ring is rolled precisely with a diameter of 2.50 m. Additional struts guarantee this two-section circle’s stability and strength. Included centre point and marking for levelling of the concrete surface inside. IAAF certified
Cover for discus and shot put ring
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12019
Cover for discuss and shot put ring, Made from special aluminium with tongue & Groove joint. Thickness 2.5 mm. With 8 extra welded handles for easy transport. It covers shot put rings, Discus & hammer rings and shot put stop boards.
Shot Put Rack Mobil
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12020
Shot put rack mobile. Made from aluminium and extreme robust. The turning wheels increase the handling comfort of this rack. It provides space for up to 15 shots.
Discus Rack Mobile
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12021
Discus rack mobile. Made from aluminium and extreme robust. The turning wheels increase the handling comfort of this rack. It provides space for up to 14 discuses.
Javelin Rack Mobile
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12022
Javelin rack mobil. Made from aluminium and extrem robust. The turning wheels increase the handling comfort of this rack. It provides space for up to 20 javelins.
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12023
Hammer rack. Made from aluminium and extreme robust. (powder coating on request)
30410: Mobile System
Combo Rack for Hammer, Discus, Shot Put & Javelin
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12024
Made from aluminium special profile. Made of mill-finished aluminium with 2 swivel castors and 2 fixed wheels, wheel diameter approx. 120 mm and powder painted.
Holds 12 javelin, 14 discuss, 8 hammers and approx.16 shot puts.
Shot Put Stop Board
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12025
Shot put stop board made of solid wood, lacquered white. IAAF certified.
Javelin Stop Board
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12026
Javelin stop board, complies with the IAAF Rules, Made from aluminium with spikes (arc of a circle radius 8 m)
Roll Back Rail for Shots
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12027
Roll back rail for Shots. Robust aluminium construction with large supports. Length 20 m. Channel width 100 mm, channel ends with rubber stoppers. On request: The channel can be purchased in assorted colours
12027-1: Alumnium surface
12027-2: Powder coated
Protection Net for Discus Throwing
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12028
Protection net for discus throwing. Post made from aluminium with 2 net hooks, with foot-plate and grass spikes. Safety net made from polypropylene, thickness 4 mm, mesh 45 mm and green color. Height: approx. 100 cm.
Shot Put Steel (Competition)
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12029
Steel powder painted, turned on whole surface, filled with special mixture of lead and fine shot.
12029-1
Competition steel shot-put, 3.00 Kg, diameter: 85 mm,
12029-2
Competition steel shot-put, 3.00 Kg, diameter: 95 mm,
12029-3
Competition steel shot-put, 3.00 Kg, diameter: 100 mm,
12029-4
Competition steel shot-put, 4.00 Kg, diameter: 95 mm, IAAF Certified
12029-5
Steel shot-put, 4.00 Kg, diameter: 108 mm,
12029-6
Competition steel shot-put, 4.00 Kg, diameter: 100 mm, IAAF Certified
12029-7
Competition steel shot-put, 4.00 Kg, diameter: 105 mm, IAAF Certified
12029-8
Competition steel shot-put, 4.00 Kg, diameter: 110 mm, IAAF Certified
12029-9
Competition steel shot-put, 5.00 Kg, diameter: 100 mm, IAAF Certified
12029-10
Competition steel shot-put, 5.00 Kg, diameter: 110 mm, IAAF Certified
12029-11
Competition steel shot-put, 5.00 Kg, diameter: 115 mm,
12029-12
Competition steel shot-put, 5.00 Kg, diameter: 120 mm, IAAF Certified
12029-13
Competition steel shot-put, 6.00 Kg, diameter: 105 mm, IAAF Certified
12029-14
Competition steel shot-put, 6.00 Kg, diameter: 110 mm,
12029-15
Competition steel shot-put, 6.00 Kg, diameter: 115 mm, IAAF Certified
12029-16
Competition steel shot-put, 6.00 Kg, diameter: 120 mm,
12029-17
Competition steel shot-put, 6.00 Kg, diameter: 125 mm,IAAF Certified
12029-18
Competition steel shot-put, 7.26 Kg, diameter: 113 mm, IAAF Certified
12029-19
Competition steel shot-put, 7.26 Kg, diameter: 115 mm,
12029-20
Competition steel shot-put 7.26 Kg. Diameter: 120 mm. IAAF Certified
12029-21
Competition steel shot-put 7.26 Kg. Diameter: 125 mm
12029-22
Competition steel shot-put 7.26 Kg. Diameter: 128 mm. IAAF Certified
Discus (Competition)
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12030
Plastic discus
Modern construction without traditional central plate, synthetic side plates with high fibreglass content, discus rim made of special alloy resistant to corrosion, designed for competition, IAAF certificate.
12030-1 Competition plastic discus, 1.00 Kg, IAAF Certified
12030-2 Competition plastic discus, 1.50 Kg, IAAF Certified
12030-3 Competition plastic discus, 1.75 Kg, IAAF Certified
12030-4 Competition plastic discus, 2.00 Kg, IAAF Certified )
Carbon Discus
the carbin discus is made for competition purpose.The discus rim is made from brass. Teh side plates are made from composite material. In this case carbon fibers and polyester espoxy resins is used. IAAF certified.
12030-5 Competition carbon discus, IAAF Certificate, 1.00 Kg
12030-6 Competition carbon discus, IAAF Certificate, 1.50 Kg
12030-7 Competition carbon discus, IAAF Certificate, 1.75 Kg
12030-8 Competition carbon discus, IAAF Certificate, 2.00 Kg
Discus (Hard Rubber)
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12031
Hard rubber discus, designed for serial throwing with a risk of hitting discuses lying on the field, very durable and resistant to unfavourable condition
12031-1 Hard Rubber discus for training, 1.00 Kg
12031-2 Hard Rubber discus for training, 1.25 Kg
12031-3 Hard Rubber discus for training, 1.50 Kg
12031-4 Hard Rubber discus for training, 1.75 Kg
12031-5 Hard Rubber discus for training, 2.00 Kg
Discus (Soft Rubber)
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12032
Soft rubber discus, made of non-marking rubber, designed for indoor training
12032-1 Soft Rubber discus for training, 1.00 Kg
12032-2 Soft Rubber discus for training, 1.25 Kg
12032-3 Soft Rubber discus for training, 1.50 Kg
12032-4 Soft Rubber discus for training, 1.75 Kg
12032-5 Soft Rubber discus for training, 2.00 Kg
Brass Hammer
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12033
Brass hammer. Brass head, turned on whole surface, accurately situated centre of gravity, filled with special mixture of lead and fine shot, hammer swivel made of high quality hardened galvanized steel, polished and covered with petroleum jelly, with handle and wire
12033-1 Competition Brass Hammer, 3.00 Kg (112 lb), diameter: 95 mm
12033-2 Competition Brass Hammer, 4.00 Kg (112 lb), diameter: 95 mm
12033-3 Competition Brass Hammer, 5.00 Kg (112 lb), diameter: 100 mm
12033-4 Competition Brass Hammer, 5.45 Kg (112 lb), diameter: 110 mm
12033-5 Competition Brass Hammer, 6,00 Kg, diameter: 105 mm, IAAF Certified
12033-6 Competition Brass Hammer, 7.26 Kg, diameter: 110 mm, IAAF Certified
Competition Steel Hammer
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12034
Steel turned head, powder painted, filled with special mixture of lead and fine shot, hammer swivel made of high quality hardened galvanized steel, steel galvanized wire, light and durable hammer handle.
12034-1Competition Brass Hammer, 7.26 Kg, diameter: 110 mm, IAAF Certified
12034-2Competition steel Hammer, 3 Kg, diameter: 95 mm, IAAF Certified
12034-3Competition steel Hammer, 4 Kg, diameter: 95 mm, IAAF Certified
12034-4Competition steel Hammer, 4 Kg, diameter: 100 mm,
12034-5Competition steel Hammer, 5 Kg, diameter. 100 mm,IAAF Certified
12034-6Competition steel Hammer, 5 Kg, diameter. 105 mm,
12034-7Competition steel Hammer, 6 Kg, diameter: 105 mm, IAAF Certified
12034-8Competition steel Hammer, 6.00 Kg, diameter: 110 mm,
12034-9Competition steel Hammer, 7.26 Kg, diameter: 110 mm. IAAF Certified
12034-10Competition steel Hammer, 7.26 Kg, diameter: 113 mm.
12034-11Competition steel Hammer, 7.26 Kg, diameter: 115 mm.
12034-12Hammer handel, straight grip, 130 mm
12034-13Hammer handel, curved grip, 130 mm
12034-14 wires for hammers
12034-15 wires for all training hammers
Competition Stainless Steel Hammer
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12035
Stainless steel head, turned on whole surface, accurately situated centre of gravity, filled with special mixture of lead and fine shot, hammer swivel made of high quality hardened galvanized steel
12035-1: 4 Kg, diameter 95 mm, IAAF Certified
12035-2: 5 Kg, diameter 100 mm, IAAF Certified
12035-3: 5.45 Kg ), diameter: 105 mm
12035-4: 5.45 Kg (112 lb), diameter: 110 mm
12035-5: 6.00 Kg, diameter: 108 mm, IAAF Certified
12035-6: 7.26 Kg, diameter: 110 mm. IAAF Certified
Distance Marker Boxes for Discus, Hammer, Javelin
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12036
Made from fibreglass-reinforced plastic for shot-put, discus, hammer and javelin throw. Triangular numbered, stackable. With single-digit numbers, height 35 cm, numbers 20 cm high. Numbers 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90 m (1 Set 22 PCS)
Distance Marker Boxes for Shot Put
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12037
Made from fibreglass-reinforced plastic for shot-put.Triangular numbered, stackable. With single-digit numbers, height 35 cm, numbers 20 cm high. Numbers12, 14, 16, 18, 20, 22 m (1 Set 12 PCS)
Rectangular Distance Marker
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12038
Powder coated rectangular aluminum distance markers. With blue numbers om both side. With 80 cm pin. Available as set and single pieces
31815:Rectangular aluminum distance markers for shot put. Numbers12, 14, 16, 18, 20, 22 m (1 Set 12 PCS)
31816:Rectangular aluminum distance markers hammer, discus, and javelins. Numbers 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90 m (1 Set 22 PCS)
31817:Rectangular aluminum distance markers for hammer, discus, and javelins. Numbers 35, 45, 55, 65, 75, 85, 95 m (1 Set 7 PCS)
31818:Rectangular aluminum distance markers for shot put. Numbers 14, 16, 18, 20, 22 m (1 Set 5 PCS)
31819:Rectangular aluminum distance markers with number. Available as piece
Anchor Bars for Handicapped Throwing Disciplines
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12039
The anchor bars for handicapped athletes is made from aluminium. It is used for the throwing disciplines. The anchor bar allows the athlete to be strapped into position. The bar measures a cross section of 120x100x2.5 mm. It is three meters long and is equipped with two fixing hooks and four sliding fastening points.
Record Marker
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: ms 12040
Record marker. Designed for throwing events. Made from aluminium. White powder coated
Q Marker
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12041
Qualifying standard marker. Designed for throwing events. Made from aluminium. White powder coated
Chalk Stand
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12042
Mobile Chalk Stand made of aluminium material, powder coated, 71 cm high. Funnel diameter about 38 cm. Includes casters.
AFN SPORTS Measuring Sets
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12043
Our SPORTS Measuring Sets test throwing implements in terms of all technical requirements defined by the IAAF.
Javelin testing device. Allows you to locate javelin gravity centre, read out length data and position points where to check javelin diameters with the enclosed electronic clipper.
Gravity center testing device. Tested implements stay always under operator's control without risk of falling and causing damages or injuries. Stable steel construction coated with hammer powder paint of high resistance and aesthetics value. Lifting hardened steel sleeve. Steel galvanised lever with comfortable grip.
Hammer testing device. Unique device guarantees fair testing for all hammers regardless of operator's strength. The user tightens the hammer wire with two levers. The tightening force is automatically adjusted by the mechanism itself
Hammer Measuring Device
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12044
The hammer measuring device is made from aluminium. The device is able to check the length of the wire as well as the centre of gravity.
Javelin for Competition
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12045
12045-1 Competition Javelin 600 g, class I, Length 50 m, IAAF Certified
12045-2 Competition Javelin 700 g, class I, Length 60 m, IAAF Certified
12045-3 Competition Javelin 800 g, class I, Length 80 m. IAAF Certified
12045-4 FULL CARBON 600g competition javelin IAAF certified
12045-5 FULL CARBON 800g competition javelin IAAF certified
12045-6 Air Flyer 400g base model for beginners
12045-7 Air Flyer 500g base model for beginners IAAF certificate
12045-8 Air Flyer 600g base model for beginners IAAF certificate
12045-9 Air Flyer 700g base model for beginners IAAF certificate
12045-10 Air Flyer 800g base model for beginners IAAF certificate
12045-11 Sky Challenger 500g model for advanced competitors IAAF certificate
12045-12 Sky Challenger 600g model for advanced competitors IAAF certificate
12045-13 Sky Challenger 700g model for advanced competitors IAAF certificate
12045-14 Sky Challenger 800g model for advanced competitors IAAF certificate
12045-15Space Master 600g top competition javelin model IAAF
12045-16 Space Master 600g top competition javelin model IAAF
12045-17 Space Master 700g top competition javelin model IAAF
12045-18 Space Master 800g top competition javelin model IAAF certificate
12045-19 Space Master 500g, 2013 model, top competition javelin model with cigar head, IAAF certificate
12045-20 Space Master 600g, 2013 model, top competition javelin model with cigar head, IAAF certificate
12045-21 Space Master 700g, 2013 model, top competition javelin model with cigar head, IAAF certificate
12045-22 Space Master 800g, 2013 model, top competition javelin model with cigar head, IAAF certificate
Javelin for Training & School Sport
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12046
School Javelins
12046-1 300 g with rubber head
12046-2 400 g with rubber head
12046-3 500 g with rubber head
12046-4 600 g with rubber head
12046-5 300 g with steel head
12046-6 400 g with steel head
12046-7 500 g with steel head
12046-8 600 g with steel head
12046-9 700 g with steel head
12046-10 800 g with steel head
Training javelins
12046-11 400 g
12046-12 500 g
12046-13 600 g,
12046-14 700 g - dimensions 600g
12046-15 700 g
12046-16 800 g
12046-17 900 g
12046-18 1000 g
Shot Put Steel (Training)
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12047
Steel turned shot put, powder painted, filled with special mixture of lead and fine shot
12047-1 1 kg
12047-2 1,5 kg
12047-3 1,8 kg
12047-4 2 kg
12047-5 2,27 kg, dia. 108 mm
12047-6 2,5 kg
12047-7 2,5 kg dia. 100 mm
12047-8 2,7 kg
12047-9 2,72 kg
12047-10 2,72 kg dia. 90 mm
12047-11 3 kg,
12047-12 3,18 kg dia. 108 mm
12047-13 3,2 kg
12047-14 3,25 kg
12047-15 3,25 kg, dia. 108 mm
12047-16 3,25 kg dia. 95 mm
12047-17 3,5 kg
12047-18 3,5 kg, dia. 105 mm
12047-19 3,5 kg, dia. 106 mm
12047-20 3,5 kg, dia. 108 mm
12047-21 3,5 kg dia. 95 mm
12047-22 3,6 kg
12047-23 3,6 kg, dia. 108 mm
12047-24 3,75 kg
12047-25 3,75 kg, dia. 108 mm
12047-26 3,8 kg
12047-27 3 kg dia. 128 mm
12047-28 3 kg dia. 90 mm
12047-29 4 kg,
12047-30 4,2 kg
12047-31 4,2 kg, dia. 108 mm
12047-32 4,25 kg
12047-33 4,25 kg, dia. 108 mm
12047-34 4,4 kg
12047-35 4,5 kg
12047-36 4,5 kg, dia. 108 mm
12047-37 4,7 kg
12047-38 4 kg, dia. 128 mm
12047-39 5 kg,
12047-40 5,2 kg
12047-41 5,44 kg, dia. 116 mm
12047-42 5,45 kg
12047-43 5,5 kg
12047-44 5,5 kg, dia. 115 mm
12047-45 5,5 kg, dia. 120 mm
12047-46 5,8 kg
12047-47 5 kg, dia. 125 mm
12047-48 5 kg, dia. 128 mm
12047-49 6 kg
12047-50 6,2 kg
12047-51 6,25 kg
12047-52 6,36 kg
12047-53 6,5 kg
12047-54 6,5 kg, dia. 120 mm
12047-55 6,5 kg, dia. 128 mm
12047-56 6,7 kg
12047-57 6,73 kg, dia. 125 mm
12047-58 6,8 kg
12047-59 6,8 kg, dia. 125 mm
12047-60 6,8 kg, dia. 128 mm
12047-61 6 kg, dia. 128 mm
12047-62 7 kg
12047-63 7,08 kg, dia. 125 mm
12047-64 7,26 kg
12047-65 7,38 kg, dia. 125 mm
12047-66 7,5kg
12047-67 7,5kg, dia. 120 mm
12047-68 7,56 kg
12047-69 7,63 kg, dia. 125 mm
12047-70 7,71 kg, dia. 128 mm
12047-71 7,73 kg
12047-72 7,75 kg
12047-73 7 kg, dia. 120 mm
12047-74 8 kg
12047-75 8,2 kg
12047-76 8,25 kg
12047-77 8,5 kg
12047-78 9 kg
12047-79 9,08 kg
12047-80 9,5 kg
12047-81 10 kg
12047-82 10 kg, dia. 137 mm
12047-83 11 kg
12047-84 12 kg
Shot Put Soft Rubber
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12048
Super soft rubber, safe in use, ideal for beginners, for indoor and outdoor training, bright visible colours
12048-1 0,15 kg dia. 65 mm
12048-2 0,2 kg dia. 65 mm
12048-3 0,3 kg dia. 65 mm
12048-4 0,4 kg dia. 65 mm
12048-5 0,5 kg dia. 65 mm
12048-6 0,6 kg dia. 65 mm
12048-7 0,8 kg dia. 100 mm
12048-8 1 kg dia. 100 mm
12048-9 1,5 kg dia. 100 mm
12048-10 2 kg dia. 100 mm
12048-11 2,5 kg dia. 100 mm
12048-12 2,72 kg dia. 115 mm
12048-13 3 kg dia. 115 mm
12048-14 3,25 kg dia. 115 mm
12048-15 4 kg dia. 115 mm
12048-16 5 kg dia. 130 mm
12048-17 5,5 kg dia. 130 mm
12048-18 6 kg dia. 130 mm
12048-19 6,25 kg dia. 130 mm
12048-20 7,265 kg dia. 135 mm
Shot and Hammer Gauges
Category: Hammers, Discus, Shot Put, and Javelin
Product Code: Ms 12049
All min/max. diameters of shots and hammer heads. 2,0 Kg, 3,0 kg, 4,0 kg, 5,0 kg, 6,0 kg and 7,26 kg can be checked. Made from powder coated aluminum.