m-strategi PORTS
Ms5-Hockey
Field Hockey Goal Net
Category: Hockey Equipment
Product Code: Ms 5000
90010: Knotless field hockey goal net in approx. 3 mm high tenacity. Made from polypropylene. Mesh size 4.5 cm, width 3.66 m, height 1.80 m, top depth 90 cm, bottom depth 120 cm. Green colour. Made in Spain.
90000: Knotless field hockey goal net in approx. 2.5 mm high tenacity. Made from polypropylene. Mesh size 2.5 cm, width 3.66 m, height 1.80 m, top depth 90 cm, bottom depth 120 cm. Green colour. Made in Spain.
Flag Poles
Category: Hockey Equipment
Product Code: Ms 5001
90035: Corner Flex Pole.175 cm long, Ø 50 mm . White color.With flexible joint, without flag. Lightweight, unbreakable, plastic, weatherproof, does not discolour. Optimal use together with ground socket
90030: Corner Poles. Non flexible, yellow colour. Ø 50 mm .Without flag. Lightweight, unbreakable, plastic, weatherproof, does not discolour. Optimal use together with ground socket
Flag Poles Mobile
Category: Hockey Equipment
Product Code: Ms 5002
Pole base made from stainless steel. Green powder coated. Weight approx 3 Kg. Included plastic corner pole 160 mm long, Diameter 50 mm. Very solid and shatterproof. Flag 40 x 40 cm. Yellow colour.
90040: Notched for corner
90050: For sideline
Transport Cart for Indoor Hockey Barrier
Category: Hockey Equipment
Product Code: Ms 5003
Hockey goals post. "Competition" model. Made from aluminium, white powder coated and with free hanging net system.
Hockey goals (3.66 x 2.14 m). Projetion 0.90/1.20 m. Complies with latest FIH regulations and requirements for international competitions.
Our features:
The frame 75 x 50 x 6 mm reduces denting due to ball impacts.
40 mm thick side and backboards made from aluminium profiles, coated with EPDM to reduce ball rebounds.
The net hangs freely in the goal frame so that the ball cannot bounce back out from the net support tubes.
Integrated safety net hooks.
Double transport rollers for easy moving.
2 years limited warranty
90080: Dismantle version for export
90060: Fully welded
Transport Cart for Indoor Hockey Barrier
Category: Hockey Equipment
Product Code: Ms 5004
Indoor Hockey Barrier, wooden/aluminium construction with special connecting mechanism. Barrier inner side with plastic-impact protection profile. Set consists of 32 barriers à 2.50 m (Weight à approx. 14 kg), easy set-up, Space-saving storage.
90240: Length 2.50 m (1Set included 32 pieces)
90230: Length 2.00 m (1Set included 40 pieces)
90250: Transport trolley for indoor hockey barrier
Transport Cart for Indoor Hockey Barrier
Category: Hockey Equipment
Product Code: Ms 5005
The transport cart for indoor hockey barrier is made from aluminium. It is equipped with four wheels, which allow a comfortable manoeuvring. The trolley provides space for a complete set of indoor hockey barrier
Hockey Side Board and Back Board
Category: Hockey Equipment
Product Code: Ms 5006
Hockey Side Board and Back Board. The side boards and back boards are made from special aluminium profiles, which are covered with EPDM. The boards are 46 cm high. The item measures a width of 3.66 m and a depth of 1.2 m. The boards are used for training purpose and can be folded, if not in use.
Hockey Technical Shelter Model
Category: Hockey Equipment
Product Code: Ms 5007
The technical shelter is made from special aluminium profiles. The lower section is lined with aluminium. The top section is covered with see through polycarbonate. On the back side, the shelter on request can covered with coloured polycarbonate sheets. The shelter measures a total height of 2.35 m . Depth 1.90 m. On the inside the shelter is equipped with a writing table. The table are made from aluminium as well. The windows in front and side can closed with roll up. Included two doors left and right side.
Another dimension available on request. Powder coating on request.
90265: Length 2.30 m
90260: Length 4,70 m
Hockey Technical Shelter Model “BA” ( SPRAY COATED)
Category: Hockey Equipment
Product Code: Ms 5008
The technical table Model ‘BA’ for hockey is made from special aluminium profiles and white spry coated .It measures a length of 4.6 m (90266). The height of the technical table is 2.5 m. The depth measures 3.0 m. The technical table is equipped with a raised floor, which is realized from special aluminium profiles with an anti-slip surface. The interior height is approx. 2.2 m, which allows an upright standing on the inside. The lower section is lined with aluminium. This provides an optimum safety against hockey balls. The top and front is covered with polycarbonate sheets, which makes the item watertight. The technical table is equipped with two sliding doors. The doors are lockable. On the inside it is furnished with a table for the judges.
90266/SP: Length 4.60 m
90267/SP: Length 2.30 m
Hockey Technical Shelter Model “BA” ( ALU SURFACE)
Category: Hockey Equipment
Product Code: Ms 5009
The technical table Model ‘BA’ for hockey is made from special aluminium profiles. It measures a length of 4.6 m (90266). The height of the technical table is 2.5 m. The depth measures 3.0 m. The technical table is equipped with a raised floor, which is realized from special aluminium profiles with an anti-slip surface. The interior height is approx. 2.2 m, which allows an upright standing on the inside. The lower section is lined with aluminium. This provides an optimum safety against hockey balls. The top and front is covered with polycarbonate sheets, which makes the item water tight. The technical table is equipped with two sliding doors. The doors are lockable. On the inside it is furnished with a table for the judges.
90266: Length 4.60 m
90267: Length 2.30 m
Technical Shelter for Hockey (ECO Version)
Category: Hockey Equipment
Product Code: Ms 5010
The technical table Model ‘BA’ for hockey is made from special aluminium profiles. It measures a length of 4.6 m (90266). The height of the technical table is 2.5 m. The depth measures 3.0 m. The technical table is equipped with a raised floor, which is realized from special aluminium profiles with an anti-slip surface. The interior height is approx. 2.2 m, which allows an upright standing on the inside. The lower section is lined with aluminium. This provides an optimum safety against hockey balls. The upper section is covered with polycarbonate sheets, which makes the item water tight. The roof section is realized in blue colour. Other colours are available on request. The technical table is equipped with two sliding doors. The doors are lockable. On the inside it is furnished with a table for the judges.
90285: Length on request
Rebound Boards Mobile & Foldable
Category: Hockey Equipment
Product Code: Ms 5011
The rebound board for hockey is made from special aluminium profiles. The aluminium structure is covered with a polyurethane foam, which is encased in a weatherproof PVC cover. The rebound board measures a width of 200 cm and a height of 35 cm. The system is foldable and can be stored easily. The board is designed to rebound the ball back when hit directly. It can be used on turf, grass or indoor floors. The item is used for training purposes.
Subject to technical alterations
Outdoor Hockey Barrier
Category: Hockey Equipment
Product Code: Ms 5012
Transport Trolley for Mobile Rebound Board for Hockey 5s. Made from alumnium.
Outdoor Hockey Barrier
Category: Hockey Equipment
Product Code: Ms 5013
The hockey 5s rebound board competition is made from special aluminium profiles. The boards are equipped with a special foam, which is surrounded by a PVC cover. The rebound boards can be locked with each other easily. They measure a height 25 cm. One set consists of corner pieces and straight pieces. One set is designed to cover a full pitch of 48 x 31.76 m. The front cover is designed in a way to give the required ball return. Therefore, a special foam was chosen to create the ball rebound to keep the game exciting. To enhance the lifetime of this product the foam is covered in weatherproof PVC. The item is designed for competitions of the highest FIH standards. (Included 4 piece Transport trolley 92009)
The hockey 5srebound board competition was used in Youth Olympic Games Buenos Aires 2018.
Outdoor Hockey Barrier
Category: Hockey Equipment
Product Code: Ms 5014
Impact Board for Hockey Fields. For attachment to barriers and fences. Made from EPDM with aluminium core. The board is slopped so that the hockey ball is deflected downwards. The individual boards are connected with internal adapters. Dimensions: height 20.5 cm, thickness 8.5 cm top, 4.5 cm bottom. The hockey board is available in red, blue and green color.
Huge problems are experienced on many hockey pitches with extreme damage to the fence and barriers caused by the impact or the hockey ball. The hockey board protects the lower area.
Hockey Stick Rack Mobile (With Curved Roof)
Category: Hockey Equipment
Product Code: Ms 5015
The rebound board for hockey is made from special aluminium profiles. The aluminium structure is covered with in situ casted EPDM. The rebound board measures a width of 200 cm and a height of 25 cm. The system is foldable and can be stored easily. The board is designed to rebound the ball back when hit directly. It can be used on turf, grass or indoor floors. The item is used for training purposes
Hockey Stick Rack Mobile (With Curved Roof)
Category: Hockey Equipment
Product Code: Ms 5016
Hockey stick rack mobile. With curved roof.Dimension: 1.45 x 0.58 x 1.46 m, Made from aluminium, With 4 turning wheels
Hockey Stick Rack Mobile (With Curved Roof)
Category: Hockey Equipment
Product Code: Ms 5017
The protective nets for hockey pitches is made from knotless PP. The thickness is 4 mm. The mesh width 45 mm. The net contains a lead cord with a weight of 600 gram per meter. The net is available in assorted colours. The bracket for the net (Order Number 92250) is made from aluminium.
Huge problems are experienced on many hockey pitches with extreme damage to the fence and barriers caused by the impact or the hockey ball. The backstop net protects the fencing.
Mini Hockey Training Goal Post
Category: Hockey Equipment
Product Code: Ms 5018
The mini soccer goal post is made from special aluminium profiles. Dimension 1800 mmx 400 mm. Projection 450 x 450 mm. it is foldable and easy for storage and transportation. The profiles for the front frame are square hollow with a cross section of 75x50x6 mm (which significantly reduces denting due to ball impacts). The profile is equipped with an integrated net suspension system. The bar frame is made from a 40x40x3 mm square hollow. The goal is available fully welded or dismantle for export.
Padding for Mini Hockey Training Goal Post 1800 x 1400 mm
Category: Hockey Equipment
Product Code: Ms 5019
PVC covered safety padding with foam core. Available in different colors.
Hockey Sin Bin Seats
Category: Hockey Equipment
Product Code: Ms 5020
Hockey Sin Bin Seats. seats with space for 3 players. Designed for use at international, and elite domestic level. Made from aluminium, white powder coated with 3 plastic seat high backrest.
5020-1: White powder coated
5020-2: Aluminium surface